Metalized film pulse capacitor can charging in a long period and discharging in a very short time, to form a huge pulse power. Pulse capacitor obtain power by the charged pulse capacitors and through the main reactor short-time oscillation discharge, but pulse capacitors group charge by the charging device with low power to charge in a long time before the test, and oscillation discharge only takes a few seconds, which greatly improve the ratio of the test of power to source power, and increase the economic efficiency. Widely use in: the magnetization machine, demagnetization machine, laser power supply, medical equipment, energy-storage welding etc; DC high voltage equipment, rectifier filter device oscillator circuit, continuous pulse device, impulse voltage generator, impulse current generator, impulse divider and other non-continuous equipment.
Main Technical Parameter
Capacitance: C=100μF～6000μF；
Capacitance tolerance：±5%，can be smaller according request.
Rated Voltage:Un=1KV～5KV
Anti-peak voltage can up to 80%.
Charged and discharged times: max. 2 million.
Loss Tangent : tgδ≤0.002（100Hz）
Use ambient temperature: -40℃～+75℃;
Installation: in any position;
Standard: JB/T8168 or request.
zachary0312
Scan Wechat
